“All-in-One” Sealer/Chamber: Compact L” Sealer and Hooded Shrink Chamber in one complete unit. Machine comes with “Band Seal Technology,” Magnetic Hold Down For seal and shrink Cycle, Pinwheel Hole Punch, and Casters.
SEAL AREA: 16”L X 22 ”W X 8”H
POWER: 220 VOLTS – 25 AMPS – SINGLE PHASE
CRATED DIMENSIONS: 3”L X 28”W X 45”H
The PP-1519 ECMC Semi-Automatic L-Bar Sealer w/ attached tunnel is a heavy duty production based unit designed to run 2 shifts per day if needed. With its heavy duty frame construction, cast aluminum seal head and Micro Knife Seal Technology you will get years of use with minimal repairs. This machine is capable of operating at speeds of 8-12 PPM.
TUNNEL FEATURES: LIVE ROLLER ROD CONVEYOR WITH FULLY RE-CIRCULATING AIR CHAMBER, AC VARIABLE SPEED CONVEYOR, 0-60 FPM, DIGITAL TEMPERATURE CONTROL AND AUTOMATIC COOL DOWN WITH SHUT OFF.
AVAILABLE IN 110 VOLTS OR 220 VOLTS.
FEATURES
NEW DESIGN FEATURING “MICRO-KNIFE” TECHNOLOGY
CAPABLE OF 8-12 PACKAGES PER MINUTE
SEAL SIZE: 15”W X 19”L
TUNNEL DIMENSIONS: 20”L X 16”W X 6”H
TUNNEL FEATURES RE-CIRCULATING AIR CHAMBER
OPTIONAL: MAGNET HOLD, POWER DISCHARGE CONVEYOR
Sale Price $7,880
*add ramp for $500
Price $53,380
Price $5,880
Toll Free 866-988-4403
909-988-4403
909-590-1103 fax
rene@binderpro.com
the BinderPro is an authorized distributor for Preferred Packaging Shrink Systems. Listed below you'll find details for our systems. We are located only minutes from the manufacturer. Please email us for complete specifications for any systems.
Binder Products PO Box 2209 Chino, Ca 91708 P 909 988 4403 F 909 590 1103 rene@binderpro.com All Rights Reserved
PP-983 With Automatic Pre-Stretch
SEMI AUTOMATIC PALLET WRAPPER WITH 225% AUTOMATIC POWERED PRE-STRETCH WITH "EASY THREAD DESIGN", 10 PROGRAM MEMORY, DIGITAL CONTROLS, PHOTO EYE, 4,000 LB CAPACITY, 18 SETS OF DOUBLE ROLLER SUPPORTS, 30-40 LOADS PER HOUR, VARIABLE SPEED TURNTABLE 0-12 RPM, 59" HEAVY DUTY TURNTABLE WITH DIAMOND PLATE NON SLIP SURFACE, 110 VOLT POWER.
PP5600 CS Combo
COMBINATION FULLY AUTOMATIC L’ SEALER AND TUNNEL BUILT ON SAME FRAME”, “APA” AUTOMATIC PRODUCT ADJUSTMENT WITH FEATURES LIKE MOTORIZED ADJUSTMENT OF INVERTING TRIANGLE,INFEED, AND CENTER SEAL (NO MORE CRANK HANDLES TO TURN BECAUSE OF A FULLY MOTORIZED ADJUSTMENT), SINGLE PIECE SEAL BLADE, EASY LOAD FILM CRADLE, FULLY ENCLOSED SAFETY DOORS, EASY ACCESS CONTROL PANEL, SELF DIAGNOSING DELTA PLC, DELTA 7″ COLOR TOUCH SCREEN WITH 40 PROGRAM MEMORY, “VERTICAL SEAL HEAD DESIGN” FOR PACKAGES UP TO 8″ HIGH, VARIABLE SPEED DRIVE (0 TO 110 FPM), SPEEDS UP TO 40 PPM.
Price $7,880
please email us for complete specifications at: rene@binderpro.com
This unique “All-In-One” L-Bar Sealer and Shrink Chamber features new “Micro Knife Technology” which can seal PVC and POF shrink films. With the dual magnet hold down, the operator simply lowers the hooded chamber and the magnets apply the seal pressure to produce great seals and eliminate operator fatigue. The magnets hold the chamber closed during the shrink cycle and releases when the shrink cycle is complete. Complete cycle time is approximately 5-10 seconds.
FEATURES
COMPACT SIZE
MICRO KNIFE TECHNOLOGY SEALS PVC OR POF
MAGNETIC HOLD DOWN
DUAL MODE SWITCH (SEAL ONLY OR SEAL & SHRINK)
HEAVY DUTY PLEXIGLASS HOOD
ADJUSTABLE TABLE LOWERS 2” FOR HIGH PRODUCTS
SS-48ST AVAILABLE IN 110V AND 220V
UNITS SHIPS VIA LTL FREIGHT ONLY. CALL FOR FREIGHT RATES
PP1622MK ECONO SET FEATURES:
1. DUAL MAGNETIC ARM HOLD DOWN APPLIES SEAL PRESSURE;
2. POWERED DISCHARGE CONVEYOR AUTOMATICALLY TRANSFERS PRODUCT INTO SHRINK TUNNEL;
3. HEAVY DUTY STEEL FRAME CONSTRUCTION WITH BAKED ENAMEL FINISH
4. CRADLE STYLE FILM RACK FOR EASY LOADING;
5. “MICRO KNIFE” BAND RIBBON – TEFLON COATED BAND RIBBON PRODUCES FAST CLEAN SEALS EVERY TIME, GUARANTEED FOR (2) YEAR WITH “NO CHARGE” REPLACEMENT.
6. STAINLESS STEEL FILM CLAMPS
7. MULTIPLE PIN PERFORATION HOLE PUNCH;
8. HEAVY DUTY SEAL HEAD RETURN CYLINDER;
9. INDEPENDENT SEAL AND DWELL TIMER;
10. HEAVY DUTY LOCKING CASTERS