Mailing PO Box 2209  Chino, Ca 91708    Physical  8926 Benson Ave., Ste. D  Montclair, Ca 91763
Binder Products is a Certified Small Business in California, reference # 24937
BinderyMate II
Bindery Mate II (model 405)
With the new improved performace and office friendly appearance, the BinderyMate II is everything you could ask for in a wire stitcher. 

BinderyMate II offers the proven economical benefits of continuous coil wire stitcher verses pre-formed staples, and with the new M-2000 Stitching Head, the BinderyMate II features quiet, durable, jam resistant operation with low maintenance. Complete portable, the BinderyMate II mounts to most work tables or the adjustable ISP stand and switches from flat to saddle stitching and back again in seconds. 
Price $2,995  *options available
MODEL 405 Dual 405
Throat Depth 4" maximum 
Capacity* 2 sheets up to 1/4" 
Standard width of stitch 1/2" 
Stitches per minutes 173 stitches per minute, full load capacity
199 stitches per minute, minimum load capacity 
Stitch height from floor 29"-41" with adjustable stand 
Size of Wire #25 (.020 diameter) 

Coil holders and wire supplied 1 holder, 1 coil #25 2 holders, 2 coils #25 
Number of heads supplied with stitcher 1                         2 
Distance between stitch centers (minimum/maximum) -             4 1/2" - 12" 

Motor 1/20 HP, 115 AC
60 cycle
single phase 1/20 HP, 115 AC
60 cycle
single phase 
Net weight 25#    60# 
Shipping weight 42#     94# 
Dual 405
Price $5,495
Model A
Model A
Fast, general purpose model for flat or saddle stitching pamphlets or booklets.


Flat or saddle stitches pamphlets, booklets, catalogs, and brochures quickly and easily. Convenient single handle adjustment for work thickness and compression from two sheets to 1/4". Operating speed-230 stitches per minute. Most productive all-around stitcher for high speed work. 

Table tilts for flat or saddle stitching. Table back and side gauges are standard equipment on this quality machine. 
Flat work or Saddle
Throat Depth: 8.5" Flat
13" Saddle 
2 Sheets to 1/4"
Electrical: 115 Volts A.C.
Shipping Weight: 285 lbs.

Price $6,495 
S3A7/8"
MODEL S3A 7/8" - The two (2) sheet to 7/8" capacity stitcher
The ISP S3A 7/8" performs like three stitchers in one. It's furnished with three sets of formers and drivers:
a set for #25 round wire (2 sheets to 1/4") 
a set for #20 x #25 flat wire (1/4" to 1/2")* 
a set for 19 x 21 1/2 flat wire (1/2" to 7/8")
As a result, the most particular customer will be pleased with perfect stitching on any job from two sheets to 7/8". The unit comes with saddle, flat table and gauges for flat and saddle stitching. 
* Shipped with these parts installed.
MODEL S3A 1 1/8" - For consistently thick flat work ranging from 1/8" to 1 1/8".
Features improved cut-off mechanism with carbide tip for #18 x 20# (type 230) high carbon book-binders wire.
Comes with table and gauges for flat stitching. Saddle is optional. (for use in the 1/8" to 1/4" work range only).

S3A7/8" $7,995
S3A1-1/8" $9,285
Staplex Heavy Duty Stapler
$850.00 with free freight
*staples up to 100 sheets of 20 lb. bond, (footpedal operated)
*takes 4 sizes of staples: 1/4", 3/8", 1/2", 5/8"
*Hi-Low Switch to adjust impact of staple head
*jam proof all steel stapling mechanism
*weighs appx. 22 lbs.
R106 Rapid Stapler
$520.00 per head

Alone this unit screw clamps to a table top

*$75.00 saddle runner
*$28.00 optical cable for connecting 2 heads
*optional stapler stand or double stapler stand
*does flat or saddle stapling from 2 sheets to 40 sheets
R106 Rapid Stapler
Options:
Interconnect Cable $89
Dual Table for Flat & Saddle $494.00
Adjustable Stand $275
Single Table $179
Stitching Machines & Heavy Duty Graphic Staplers
Now with "pop-out front loading!

Drives two staples at once automatically! A Staplex exclusive!
Cuts stapling time in half 
Fully adjustable center distances between staples from 2" to 6.5 (5.1 cm to 16.5 cm) 
Evenly spaced staples for each job 
Excellent for reports, policies, header cards 
Adjustable depth to 4¼" (10.8 cm) 
"Hi-Low" switch to adjust stapling impact
Uses Staplex Type DS ¼" and Type LL Long Leg High Speed Staples 
Foot Switch activated, Dual Capacity (for up to 40 sheets of 20‑lb. paper) and Thick Wire (for shipping bags and clam shell packages) models also available. 
Made in U.S.A. 
Now with "pop-out front loading!

Drives three staples at once automatically!
Fully adjustable center distances between each staple from 2"
(5.1 cm) to 3‑1/4 (8.3 cm), up to 6.5" (16.5 cm) outer distance 
Super speedy for many stapling and packaging applications!
"Hi-Low" switch to adjust stapling impact
Independent ON/OFF switch for each stapling module to operate also as a double head or single head stapler
Adjustable depth to 4‑¼" (10.8 cm) 
Uses Staplex Type DS ¼" or Type LL Long Leg High Speed Staples 
Staples 2-25 sheets of 20-lb. paper or equivalent 
The ultimate for neatness and productivity
Independent ON/OFF switch for each of the 3 stapling modules
Footswitch activated, Dual Capacity (for up to 40 sheets of 20-lb. paper) models also available
Made in U.S.A.

Staplex® Electric Saddle Staplers
Staplex® SS-45NHL Dual Capacity Electric Saddle/Flat  Stapler  now with "Pop-out” front loading; uses 3 sizes of staples!

New features! Adjustable table for saddle and flat stapling in 1 machine!!! 
Staples 2-40 sheets of 20-lb. paper at tap of an electronic footswitch to make booklets up to 160 pages 

3" (7.6-cm) adjustable automatic contact assembly for flat stapling (saddle pivots 90°) 
Special rotary "Hi-Low" switch adjusts stapling capacity automatically for perfect clinch every job! 
10" wide saddle for fast staple positioning. Speed through all sizes of pamphlets, magazines, etc. 
Portable, no mounting 12" x 12" base sets on desk, table, bench 
Loads in seconds with Type DS ¼" and Type LL Long Leg High Speed Staples
Heavy duty all-metal construction and modular design
Made in U.S.A. 
Completely portable. Footswitch and automatic contact assembly included. No mounting required. 

For saddle stapling - internal reach from clincher die to base: 9.5 " (24 cm)

For flat stapling - maximum depth with automatic contact: 4" (10.2 cm)

Weighs 31-lbs. (14-kg.)

Dimensions: 12"w x 12"d x 16"h (30.5 cm x 30.5 cm x 40.6 cm)


Staplex® S-700-1NHL Long Reach Automatic Electric Stapler


Adjustable depth to 9‑1/4" (23.5 cm)! A Staplex exclusive! 
Staples automatically when work is inserted.
Super for large sheets, display cards, calendars, etc. 
Staples 2-40 sheets of 20-lb. paper or equivalent
Special rotary "hi-Low" switch adjusts stapling capacity automatically for perfect clinch every job!

"Pop-out" front loading
Takes full tracks of staples, Staplex Type DS 1/4",  Type LL Long Leg and Type RLD Thick Wire Long Leg High Speed Staples
Made in U.S.A. 
Weight: 17.8-lbs. (8.1 kg) Dimensions: 3-5/8" wide, 17-1/4" deep, 7-3/4" high (9.2 cm x 43.8 cm x 19.7 cm).

Model S-700-1NHL: Long Reach Automatic Electric Stapler – 110-125 volts, 50-60 Hz AC.

Model S-700-1NHLA: same as above for 220-230 volts, 50-60 Hz AC.

Accessories:

70N-107 Electronic Foot Switch for Model S-700-1NHL - plugs in to convert S-700-1NHL to foot switch activation 

    [maximum 10-1/4" (26-cm) reach when using Foot Switch]
 

70N-BS Adjustable Backstop (left and right) for aligning work when using electronic Foot Switch [maximum 10-1/4" (26-cm) reach].
 
Staples:

Staplex Type DS High Speed Staples 1/4" leg (for 2-20 sheets 20-lb. [75 g/m2] paper or equivalent)  5,000 per box

Staplex Type LL Long Leg High Speed Staples (for 16-40 sheets 20-lb. [75 g/m2] paper or equivalent)  5,000 per box
Heavy Duty Commercial Table Top Staplers
Saddle Staplers
Long Reach Electric Stapler
This Heavy Duty Table Top Stapler is a Nice Machine.  It staples up to 1"thick.  Backgauge is fully adjustable for stapling as close to an edge as you can.  Well Built Unit !!  It also comes with side guides.  We've used this machine for stapling thick stacks for many years !  You'll be hard pressed to find a better one in it's class !

Sale Price $199
GBC Combs, Coil Binding, Velo Binding, Double Loop Wire Binding, Aluminum Screw Posts, Report Covers, 3 ring Binders, Tape Bind Strips,
James Burn Docupunch
19 ring plastic binding combs
James Burn Docupunch
Toll Free 866-988-4403 Local 909-988-4403F  909-590-1103
PL44wf 44" wide heated roll laminator
Docutech Style Copier Tabs, Reverse Collated
Manufacturers we represent:

James Burn International

Rhinotuff

GBC/Sickinger

Challenge Machinery

MBM/Triumph

CP Bourg

Morgana

Standard Horizon

Professional Laminating

Tamerica Products

Powis Parker

Aamstamp

General Graphics

Akiles