Velobind Strips
19 ring plastic binding combs
Punch Dies
GBC Combs, Coil Binding, Velo Binding, Double Loop Wire Binding, Aluminum Screw Posts, Report Covers, 3 ring Binders, Tape Bind Strips,
   Mailing PO Box 2209  Chino, Ca 91708    Physical  8926 Benson Ave., Ste. D  Montclair, Ca 91763
Binder Products is a Certified Small Business in California, reference # 24937
Binder Products is a 

Certified Small Business

in California, Reference 

# 24937.
GBC Combs, Coil Binding, Velo Binding, Double Loop Wire Binding, Aluminum Screw Posts, Report Covers, 3 ring Binders, Tape Bind Strips,
Coil Binding Supplies
Electric Power Cutting
Accurate Cutting-easy to read LED display in both metric & inches
Bright Red laser cut line, maintenance free, will not burn out
No lubrication required (maintenance free)
Heavy Duty Steel Construction
Auto releasing Front Safety Shield to enhance productivity
Guarded Knife Changing Device
External Knife Blade Adjustment
Heavy Duty Casters for portability
Plexiglass Safety Shield, Safety Dual Buttons to activate cutting cycles
Rear Table Safety Cover

S p e c i f i c a t i o n s 
 
Cutting Width 18 1/2" 
Cutting Height 3 
Minimum Cut: 1"
Cutting Length behind Knife  17-1/2" 
Table Length in front of Knife 13" 
Motor  1-1/2 hp, single phase 
Electrical 120V, 60 Hz, 20 amp
Size  38-1/4" x 29-3/4" x 48-1/2" 
Shipping Weight  700 lbs.  
Challenge
Spartan 185 Series
Paper Cutting Machines
Perfect Binding Machines
Spartan 185
Spartan Model 185SA $8,595
Manual Hand-wheel Clamping
Manual Hand-wheel Backgauge Adjustment
Spartan Model 185A $8,995
Automatic power clamping with 3,000 lbs. of clamping force to enhance the quality of cut (clamp only feature)
Manual hand wheel backgauge adjustment
Spartan Model 185AEP $10,995
Automatic power clamping with 3,000 lbs. of clamping force to enhance the quality of cut 
Electric Powered backgauge adjustment
3" Lighted LCD Display
Operator friendly software uses soft key menu prompts for simple programming, program memory: 20 programs 20 cuts per program
Automatic Pushout Safety feature

Each Cutter comes with (1) Stand, (1) Knife, (3) plastic cutting sticks, (1) jogging aid, (1) tool kit & (1) knife change safety holder assembly
Spartan 185AEP
Authorized 
Challenge Dealer
Triumph Paper Cutters

Triumph 4810 ep                    $8,149
*programmable backgauge, manual clamp

Triumph 4810 semi automatic $6,699
*manual backgauge, manual clamp

Triumph 4850                        $8,449
*electric clamp, manual backgauge
​Lease for Only $440/month !

Triumph 4850ep                     $9,999
*programmable backgauge, electric clamp  Lease for Only $520/month !

All 4800 series has 18-7/8" cutting width & 3" cutting height
*115v electrical
*all cutters except 4810 semi automatic, have optical cutting lines
PBS 2000 Table Top Perfect Binder
The PBS-2000 tabletop perfect binder is compact but loaded with features. With a simple push of a button, you can make perfect bound books.  It incorporates the same processes that professional book binderies use, spine roughening, hot-melt adhesive, and precise clamping. 
Cycles/Hour 180
- Cover insertion Manual
- Glue type EVA
- Spine preparation Notching
- Minimum book size 3 x 3
- Maximum book size 12.4 H x 9.6 W 
- Maximum binding thickness 1.5
- Mode of operation: Single button
- Number of clamps 2
- Power requirement 110V, 60Hz
- Dimensions W x D x H 25.6 x 21.7 x 10.6
- Weight 127 lbs 

Reg. Price $5,995
Sale Price $4,495
Simple to Operate !  Drop your book block in, insert your cover & let the machine do the rest !
Use Our Hardcovers with the 460a Binder to make beautiful Hardcover Books !
With today’s digital print market placing great demands on your business, some decisions can be difficult. Investments in cutting-edge wide format, inkjet, and digital print engines ensure you meet your customer’s diverse needs, but there are so many choices! When it comes to choosing your next paper cutter, this one is easy…step up to a Titan 200! 

The Titan 200 continues to Challenge the excellence of innovation and strength we’ve become famous for since 1870. The Titan 200 is based on a solid cast iron and steel construction for maximum durability. UHMW gib surfaces, LED line lights, and a one-inch thick solid tool aluminum table require virtually no maintenance for years of trouble-free operation.

The intuitive menu-driven controller allows variable mode data entry with up to 99 jobs / 9,801 total cut position storage. The optional electronic clamp pressure control minimizes waste. Machine self-diagnostics and error indication walks the operator through any potential difficulties.

The Titan 200 meets the toughest safety standards in the industry today. Light-safety curtains, enclosed rear table, two-hand cut buttons, and knife safety latch contribute to our UL and CE certifications.

Proudly manufactured in the USA, The Titan 200 continues our legacy of providing…assurance you made the right decision.


■Fully hydraulic cutting and clamping
■Solid cast iron and steel construction ensure years of trouble-free operation
■Solid 1-inch thick tool grade aluminum table offers the strong work surface required in production environments
■Bright red LED line light is easy to see and needs no future replacement
■Optional electronic clamp pressure adjustment
■Fully programmable controller offers intuitive operation and up to 9,801 total cut position storage

Price $14,295 with Light Beam Safety
Maximum Cutting Width: 20" / 50.8cm 
Minimum Cut: without false clamp plate 1/2" / 13mm 
                          with false clamp plate 1-7/8" / 48mm 
Maximum Cut Depth: 20" / 50.8cm 
Clamp Opening: without false clamp plate 3-1/4" / 8cm 
                             with false clamp plate 3" / 7.6cm 
Clamping Method Hydraulic and Manual 
Backgauge Control Power 
DIMENSIONS 
Table Space:  in front of knife 15-1/4" / 39cm 
                         behind knife 20" / 51cm 
Overall Height 53" / 135cm 
Overall Width 36" / 91cm 
Overall Length 49-5/8" / 126cm 
Net Weight (approximate) 795 lbs / 361 kg 
Shipping Weight (approximate) 920 lbs / 418 kg 
ELECTRICAL 
1-1/2 H.P. 1 Phase, 60 Hz, AC
230 Volts, 12 Amps (service size 15 Amps)
Requires receptacle type: NEMA 6-15R or 6-20R
U.L. Listed 
AUTOMATIC PROGRAMMABLE CUTTER
SCS® (Safety Cutting System) package: hinged, transparent electronically controlled front safety guard; transparent safety cover on rear table; main switch and safety lock with key; electronically controlled, true two-hand operation; 24 volt controls (low voltage); patented IDEAL safety drive; automatic blade return from every position; automatic clamp return from every position; disc brake for instant blade stop; blade and cutting stick can be changed without removing covers; blade changing device covers cutting edge of blade; blade depth adjustment from outside of machine

25 1/2 inch cutting width accommodates parent stock | high storage capacity, programmable EP back gauge control module with 10 button keypad and LED display stores 99 programs (up to 99 steps each) and frequently used measurements | up to 9 repeat cuts can be integrated into a program in a single step | digital measurement readout in cm or inches (accurate to 1/10 mm or 1/100 inch) | control module features repeat cut and eject functions | "set" function key for reference measurement | self-diagnostic system with error indication on display | electric blade, clamp, and back gauge drive | Solingen steel blade | solid steel blade carrier and adjustable blade guides | automatic clamp is guided on both sides to apply even pressure along entire cutting width (can be lowered or raised independently from blade) | dual side guides on front and rear tables | spindle-guided back gauge with narrow separations and plastic gliders | electronic hand wheel with variable speed control for manual back gauge setting | bright, LED optical cutting line | all-metal construction | stand with storage shelf | UL and C UL approved

Dimensions (D x W x H): 49 3/4" x 39 1/4" x 48 1/4" 
Shipping weight: 801 lbs.

Price $12,899
PROGRAMMABLE HYDRAULIC CUTTER
SCS® (Safety Cutting System) package: front safety light beams; safety cover on rear table; main switch and safety lock with key; electronically controlled, true two-hand operation; 24 volt controls (low voltage); patented IDEAL safety drive; automatic blade return from every position; automatic clamp return from every position; blade and cutting stick can be changed without removing covers; blade changing device covers cutting edge of blade; blade depth adjustment from outside of machine

high storage capacity, programmable EP back gauge control module with 10 button keypad and LED display stores 99 programs (up to 99 steps each) and frequently used measurements | up to 9 repeat cuts can be integrated into a program in a single step | digital measurement readout in cm or inches (accurate to 1/10 mm or 1/100 inch) | control module features repeat cut and eject functions | "set" function key for reference measurement | self-diagnostic system with error indication on display | hydraulic blade and adjustable hydraulic clamp drive | HSS Solingen steel blade | precision swing-cut blade movement | solid steel blade carrier and adjustable blade guides | clamp is guided on both sides to apply even pressure along entire cutting width and is fully adjustable between 1,900 and 3,800 psi | false clamp and foot pedal for pre-clamping | electric, spindle-guided back gauge drive | electronic hand wheel with variable speed control for manual back gauge setting | bright, LED optical cutting line | mounted on casters | durable stainless steel work surface, front and rear | all-metal construction | optional side tables (shown) with stainless steel extend work area | UL and C UL approved

Dimensions (D x W x H): 55" x 42" x 54" (64" W with side tables) 
Shipping weight: 970 lbs. (1,007 lbs. with side tables)

Price $16,299
PROGRAMMABLE HYDRAULIC CUTTER
SCS® (Safety Cutting System) package: front safety light beams; transparent safety cover on rear table; main switch and safety lock with key; electronically controlled, true two-hand operation; 24 volt controls (low voltage); patented IDEAL safety drive; automatic blade return from every position; automatic clamp return from every position; disc brake for instant blade stop; blade and cutting stick can be changed without removing covers; blade changing device covers cutting edge of blade; blade depth adjustment from outside of machine

high storage capacity, programmable back gauge control module with 10 button keypad and LED display stores 99 programs (up to 99 steps each) and frequently used measurements | up to 9 repeat cuts can be integrated into a program in a single step | digital measurement readout in cm or inches (accurate to 1/10 mm or 1/100 inch) | control module features repeat cut, eject (with and without program mode), and memory functions as well as a delete and insert mode for modifying program steps | automatic measuring correction in case of back gauge displacement | "set" function key for reference measurement | self-diagnostic system with error indication on display | integrated calculator | push buttons for fast back gauge movement (forward and reverse) | electric blade and back gauge drive | HSS Solingen steel blade | precision swing-cut blade movement | solid steel blade carrier and adjustable blade guides | hydraulic clamp drive | clamp pressure is fully adjustable between 550 and 4,400 psi | false clamp and foot pedal for pre-clamping | spindle-guided back gauge with narrow separations and plastic gliders | electronic hand wheel with variable speed control for manual back gauge setting | bright, LED optical cutting line | durable stainless steel work surface, front and rear | air jets on front and rear tables allow easy movement of paper | all-metal construction | optional side tables with stainless steel surface extend work area | UL and C UL approved 

Dimensions (D x W x H): 59 1/2" x 51 3/8" x 52 1/2" (82 3/4" W with side tables) 
Shipping weight: 1,686 lbs. (1,772 lbs. with side tables)

Price $23,999
Press Here for Hardcover Supplies & ready made Perfect Bind Hardcovers !
GBC Combs, Coil Binding, Velo Binding, Double Loop Wire Binding, Aluminum Screw Posts, Report Covers, 3 ring Binders, Tape Bind Strips,
James Burn Docupunch
19 ring plastic binding combs
James Burn Docupunch
This is a great fit for companies or small print shops with low cutting requirements.  A full 18" cutting width gives you plenty of cutting room for full size sheets plus an astounding 800 sheet cutting capacity.  The Manual backgauge and clamp are easy to adjust for any size cut and a convenient safety shield helps protects your hands from any potential danger.  All metal construction & a solid 1 yr. warranty.  This unit is a winner !

Price $1,995

Stand included 
Max Cutting capacity of 800 sheets of 20lb paper 
Max Cutting length of 18" 
Laser Guide for precision cutting 
Wheel Driven paper clamp 
Hand crank driven paper stop 
Measuring scale in inches, millimeters, and centimeters 
Ergonomically designed cutting handle 
Protective shield on both sides of the blade 
Rear shield functions as safety lock
Another great addition to our line-up of print finishing solutions. These perfect binding systems are easy to use and give excellent results for anyone looking fo a short to medium length run solution. These machines are solidly built and include features that are normally standard on more expensive units. 
Features: 
 
 Electrical:  220-240V 1phase / 20A   
 Floor Model:  Yes   
 Max Binding Speed:  450 books/hour   
 Max Binding Length:  18.1”(46cm)   
 Max Binding Thickness:  2.25”(6cm)   
 Notching:  Double layer (24 blades)   
 Dimensions:  Length: 62” (156 cm)
 Width: 29” (72 cm)
 Height: 51” (130 cm)
 Weight: 575 lbs (260 kg)   
 Clamping of Sheets:  Electric / fully automatic   
 Clamping of Cover:  Electric    
 Cover Insertion:  Manual   
 Warm up Time:  20-30 minutes   
 LCD Display:  Yes   
 Dust Extraction:  Vacuum, enclosed   

Miscellaneous Information:

Clamp opens and closes with the single press of a button 
Notching blades are housed beneath safety covers so that that are not exposed to the operator 
Hot melt glue is applied to the spine by a rotating application drum 
A scaper bar ensures that a smooth and uniform thickness of glue is always applied 
Nip dwell time can be adjusted to ensure professional looking finished pieces are produced every time. 

Price $12,750
GW 460a Perfect Binder
We also sell CHALLENGE Paper Cutters 30" to 37" Wide.  Please let us know your requirements ! 
PL44wf 44" wide heated roll laminator
Docutech Style Copier Tabs, Reverse Collated
Manufacturers we represent:

James Burn International

Rhinotuff

GBC/Sickinger

Challenge Machinery

MBM/Triumph

CP Bourg

Morgana

Standard Horizon

Professional Laminating

Tamerica Products

Powis Parker

Aamstamp

General Graphics

Akiles
Binder Products is a Certified Small Business in California, reference # 24937 !                Toll Free 866-988-4403 Local 909-988-4403F  909-590-1103